Views：25852
Integrated circuit board, in the subsequent production
process, there are generally on-line pre-processing procedures, such as
burning. In this process, the circuit board will often lead to longer retention
time. Many enterprises will use electronic dry cabinets to
store stranded circuit boards. The following is to say in this process to store
circuit board what matters for attention?
Integrated circuit board is generally classified as PCB
circuit board, and also called multi-layer circuit board, its main prevention
after unpacking is to prevent the chips from getting damp. The use of humidity
control cabinets is also to prevent the moisture to attack
circuit boards. In addition to moisture-proof, the use of dry
storage cabinets can also reduce the oxidation of metal parts
such as circuit board pins and achieve the purpose of anti-oxidation.
Therefore, drying cabinet is the best choice for
integrated circuit board and other MSD storage.
In the process of circuit board burning and recording, one
of the different characteristics of chip storage and warehouse storage is that
the electronic moisture-proof cabinet, which is stored,
will often open and close. This is also determined by the circuit board needs
to be burned out in batches of the process characteristics.
The main points for attention in the process are the
dehumidification performance of the moisture sensitive level corresponding to
the chip, the dehumidification speed of the drying cabinet and the recovery
time of the switch door.
Generally speaking, the moisture-proof cabinet in the
burning process must have fast and ultra-low humidity performance. In this
respect, we can refer to our fast ultra-low humidity cabinet introduction.
In addition, it is still necessary to pay attention to the
protection of static electricity when the dry cabinet is used in this process,
which is carried out jointly by the anti-static consciousness of the operator
and the anti-static measures of the moisture-proof box.
Another point to note is that operators need to take the
material in as short a time to complete. Operators are required to place
materials in electronic moisture-proof cabinets as far as possible. Good
quality protection measures can cause good quality products.
