Views：25836
As
enterprises value MSD (moisture sensitive components) storage protection, more
and more enterprises use dry cabinet to keep their MSD such as IC、BGA . The EJER also carries on the
continuous development to the dry cabinet, now EJER has introduced the gating
system, has made a further breakthrough to the MSD protection.
Both
rapid dehumidification and gating systems are designed to make MSD better
moisture control, Of the many MSD characteristics, one special feature needs
our attention, that is, the cumulative characteristics of MSD moisture.
Moisture goes deep into the MSD chip when MSD is placed in ordinary or
relatively high humidity, moisture will take advantage of the empty. The
purpose of the humidity control cabinet is to keep MSD from moisture by
creating a low humidity environment when stored. When the MSD absorbs moisture,
the moisture will exist inside the MSD and stop the moisture after the storage
measures are done. When the MSD is next placed in a humid environment, the
external moisture will enter the MSD, and gradually increase the degree of MSD
moisture.
In
these processes, the moisture will accumulate together to form a moisture
accumulation process. And that’s w
hat we usually call MSD moisture
accumulation.
For
the traditional industrial desiccator dry box, the drying cabinets will open
and close when the MSD is stored, and the humidity will rise to a relatively
high humidity environment after the opening and closing. If the industrial dry
storage cabinet can’t reduce the humidity in time, then the MSD is also a damp
process in the process of opening and closing the door. If the dehumidification
speed of the industrial humidity storage cabinet is good, the moisture
accumulation of MSD will be very good.
In
addition, the length of the switch door of the industrial electronic dry
cabinet largely determines the degree of humidity rise after opening and
closing. At present, in many enterprises, when MSD in and out of the drying
cabinet, the operator is required to finish in as short a time as possible, and
the opening and closing must be carried out within the specified time. However,
depending on the operating staff will have many objective factors, which often
makes this time difficult to achieve.
And
the innovative gating system of EJER moisture control cabinet is to control
these conditions. On the one hand, if the operation staff in excess of the
specified time has not ended the opening and closing, there will be a
corresponding alarm warning.? the humidity in the cabinet has not returned to
the ideal humidity, it is not allowed to switch on and off the cabinet door.
With the introduction of this system, it is received a good response from customers, for the MSD moisture control to provide better humidity-controlled cabinet equipment. Also, create better product quality assurance for enterprises. Visit our website https://www.dry-cabinet.cn for more details.
